After more than 4 years of development, we created 7 magnetic phone mounts for motorcycles. But, among all these products, which one should you choose for the best experience?
Classic Motorcycle
Motorcycle handlebar mount with strap attachment
Discover the fastest and easiest-to-install phone mount on the market. Simple to use, it ensures exceptionally reliable hold regardless of road conditions.
With its silicone strap, attach your mount to handlebars up to 30 mm in diameter.



Collapsible content
For which vehicle(s)?
- Motorcycle
- Bicycle
- Scooter
Compatibility
Compatible with handlebars and stems up to 30 mm in diameter
Installation
1. Choose the mounting based on the diameter of your handlebar or stem clamp:
- Handlebar or stem clamp from 20 to 30 mm in diameter: use the strap
- Handlebar or stem clamp from 30 to 50 mm in diameter: use the elastic bands
- The strap and elastic bands are made of ultra-resistant silicone with a 2-year guarantee. No risk of damaging your motorcycle's paintwork.
2. Position your mount on the handlebar or stem clamp of the motorcycle, hook the strap or elastic bands onto the mount.
3. Insert your phone into the Sleeve, snap it onto the mount (making sure to center it properly) and you're off!
Classic Motorcycle
Motorcycle handlebar mount with elastic strap
Using the elastic bands, attach your mount to the thickest handlebars with a diameter of 30 to 50 mm.
Warning: The 2 attachments (strap and elastic bands) should not be used at the same time. The elastic bands are provided for cases where the strap is too short for the handlebar diameter.



Collapsible content
For which vehicle(s)?
- Motorcycle
- Bike / /
- Scooter
Compatibility
Compatible with handlebars and stems up to 50 mm in diameter
Installation
1. Choose the mounting based on the diameter of your handlebar or stem clamp:
- Handlebar or stem clamp from 20 to 30 mm in diameter: use the strap
- Handlebar or stem clamp from 30 to 50 mm in diameter: use the elastic bands
- The strap and elastic bands are made of ultra-resistant silicone with a 2-year guarantee. No risk of damaging your motorcycle's paintwork.
2. Position your mount on the handlebar or stem clamp of the motorcycle, hook the strap or elastic bands onto the mount.
3. Insert your phone into the Sleeve, snap it onto the mount (making sure to center it properly) and you're off!
Moto pro
Screwed mount for motorcycle handlebar
Compatible with most motorcycle handlebars from 22.2 to 31.8 mm in diameter, the Shapeheart Motorcycle Stand Pro allows you to secure your phone by screwing the magnetic mount onto your handlebar.



Collapsible content
For which vehicle(s)?
- Motorcycle
- Bicycle
Compatibility
Compatible with motorcycle and bicycle handlebars from 22.2 to 31.8 mm in diameter
Installation
1. Choose the adapter based on the diameter of your handlebar:
- Handlebar of 31.8 mm in diameter: no adapter.
- Handlebar of 28.6 mm in diameter: 1.7 mm adapter.
- Handlebar of 25.4 mm in diameter: 3.5 mm adapter.
- Handlebar of 22.2 mm in diameter: 5.1 mm adapter.
2. Position the adapter on the handlebar, then screw the mount on top using the Allen key.
3. Insert your phone into the Sleeve, snap it onto the mount (making sure to center it properly) and off you go!
Moto pro Boost
Boost screw mount for motorcycle handlebar
The Shapeheart Motorcycle Stand Moto Pro Boost lets you mount your phone on your handlebars so your GPS can guide you.
Supplied with its Booster 360, orient your smartphone however you like.



Collapsible content
For which vehicle(s)
- Motorcycle
Compatibility
Compatible with motorcycle and bike handlebars from 22.2 to 31.8 mm in diameter
Installation
1. Choose the adapter based on the diameter of your handlebar:
- Handlebar of 31.8 mm in diameter: no adapter.
- Handlebar of 28.6 mm in diameter: 1.7 mm adapter.
- Handlebar of 25.4 mm in diameter: 3.5 mm adapter.
- Handlebar of 22.2 mm in diameter: 5.1 mm adapter.
2. Position the adapter on the handlebar, then screw the mount on top using the Allen key.
3. Adjust the Booster 360 (or extension arm) to your liking by tightening the 3 screws on the orientation axes, until the Booster can no longer move.
4. Insert your phone into the Sleeve, snap it onto the mount (making sure to center it properly) and off you go!
Moto Stem
Screw-on mount for motorcycle half-handlebar
The magnetic phone mount for sport motorcycles is easy to install on any half-handlebar or clip-on handlebar with a hole diameter ranging from 11 to 24 mm. Simple to use, it ensures reliable hold regardless of road conditions or speed.



Collapsible content
For which vehicle(s)?
- Sport motorcycle
Compatibility
Compatible with sport motorcycles with a stem hole diameter ranging from 11 to 24 mm
Installation
1. Choose the right adapter and nut based on your steering stem diameter:
- Steering stem from 11 to 13.9 mm: 11 mm adapter and 11 mm nut.
- Steering stem from 14 to 16.9 mm: 14 mm adapter and 11 mm nut.
- Steering stem from 17 to 24 mm: 17 mm adapter and 14 mm nut.
2. Remove the silicone cover from the mount, tighten firmly using the Allen key until the cylindrical silicone part is compressed and it is impossible to remove the mount by hand.
3. Put the silicone cover back on. Insert your phone into the Sleeve, snap it onto the mount (making sure to center it properly) and off you go!
Moto Stem Boost
Boost bolt-on mount for motorcycle half-handlebar
Ideal for sports motorcycles, this magnetic half-handlebar mount will protect your phone from rain and vibrations while ensuring exceptional reliability regardless of the road or speed. Thanks to the included 360° Booster, orient your smartphone in the ideal position and let your GPS guide you.



Collapsible content
For which vehicle(s)?
- Sport motorcycle
Compatibility
Compatible with any half-handlebar from 11 to 24 mm in diameter
Installation
1. Choose the right adapter and nut based on your steering column diameter:
- Steering column from 11 to 13.9 mm: 11 mm adapter and 11 mm nut.
- Steering column from 14 to 16.9 mm: 14 mm adapter and 11 mm nut.
- Steering column from 17 to 24 mm: 17 mm adapter and 14 mm nut.
2. Place the mount in the steering column and tighten firmly with the Allen key so that it is almost impossible to remove the mount by hand.
3. Assemble the Booster 360 by replacing the screw, and adjust it to your preference by tightening the 3 orientation axis screws until the Booster can no longer move.
4. Insert your phone into the sleeve, snap it onto the mount (making sure to center it properly) and off you go!
Mirror Pro
Mirror-mounted screw mount for motorcycle
The Pro mirror mount screws on in seconds to the vast majority of motorcycle or scooter mirrors. With its two silicone adapters, it fits mirrors between 8 and 17 mm in diameter.



Collapsible content
For which vehicle(s)?
- Motorcycle
- Scooter
Compatibility
Fits mirrors with a diameter of 8 to 17 mm
Installation
1. Choose the right adapter based on the diameter of your mirror stem:
- Mirror stem from 15 to 17 mm: no adapter
- Mirror stem from 11 to 15 mm: 1 mm adapter
- Mirror stem from 8 to 11 mm: 3 mm adapter
2. Using the Allen key, screw the magnetic mount with the head facing down to avoid dropping the screws, then flip it back up.
3. Insert your phone into the Sleeve, snap it onto the mount (making sure to center it properly) and off you go!
