They trust us:
Protects your phone
Absorbs vibrations
Protects your phone
Absorbs vibrations
Our sleeve absorbs up to 50% of engine and road vibrations, eliminating any risk of damage.
ALL MIRRORS
Turnkey installation
ALL MIRRORS
Turnkey installation
1. Choose the right adapter based on the diameter of your mirror tube:
- Mirror tube from 15 to 17 mm: no adapter.
- Mirror tube from 11 to 15 mm: 1 mm adapter.
- Mirror tube from 8 to 11 mm: 3 mm adapter.
2. Using the Allen key, screw the magnetic mount with the head facing down to avoid dropping the screws, then flip it back up.
3. Insert your phone into the sleeve, snap it onto the mount (making sure to center it properly) and you're off!
Do you still have questions?
Are the magnets dangerous for my phone?
No. Simply because there is no magnetic field in the sleeve or through the plate. We explain everything here.
Keep in mind that brands like Apple now even put magnets inside the phone itself.
I've heard that mounts can damage the phone camera?
True, for motorcycles only — where engine vibrations from certain bikes can damage the optical image stabilizer of some phones (mainly iPhone).
Our mounts with sleeves absorb the vibrations, so there is no risk.
We explain everything here.
Can my phone be stolen?
The question is legitimate, but it is absolutely not an issue we encounter.
On one hand, keep in mind that the mount is removable. Our mounts are very discreet, with no apparent distinguishing features. There is no more risk than when walking down the street with your phone in hand.
Snatch-and-grab thefts happen, most of the time, on public transport. On the subway, for example, where once the doors are closed, there is nothing you can do.
Once again, the question is legitimate, but we have not had a single report of this type of theft.
If your concern remains, you can install the Shapeheart phone lanyard.
Is the sleeve fully touch-responsive?
Yes, of course. And to ensure the touchscreen is as responsive as possible, it's important to choose the right sleeve size — refer to our size guide for that.
Does the sleeve really protect against rain?
The Classique and Pro sleeves protect against rain but are not designed to be submerged in water — they are not waterproof. For that, you need to choose the waterproof sleeve.
But under normal conditions, you can ride in the rain without any worries with our 3 sleeves.
Does the phone overheat?
Obviously, inside the sleeve the phone will heat up more than without one. It then depends on the phone, the GPS, whether you are charging the phone at the same time, and the outside temperature.
It's rare but it can happen. In that case, it's better to go with the version using a metal plate.
Are there reflections in sunlight?
Yes, it can happen. Depending on the position of the sun, the angle of the phone, or your posture on your 2-wheeler. You can use the metal plate to reduce this effect, but keep in mind that even without a sleeve, in full sunlight, visibility can be reduced.
Don't forget to set your brightness to the maximum either.
Can I charge my phone?
Yes of course! The Classique and Pro sleeves have a slot to pass the charging cable through.
What if I change my phone?
If you stay with an equivalent size, you don't need to buy anything. If not, you can just repurchase the sleeve — no need to buy everything again.
Is there a warranty?
Yes, up to 10 years by registering your product. Everything is explained here.
Is it compatible with wireless charging and/or MagSafe?
The metal plate is not directly compatible with wireless charging. By sticking the metal plate onto your phone case, you simply need to remove the case to charge your phone on your MagSafe charger.
MagSafe alone will not be sufficient to withstand impacts. You must use the Shapeheart sleeve or metal plate to ensure proper use of the mounts.
Which version should I choose?
Everything is explained: here.
