Professionals trust us:
Protects your phone
Absorbs vibrations
Protects your phone
Absorbs vibrations
By mounting your phone on your motorcycle or scooter, it may be subject to certain high-frequency vibrations emitted by your vehicle's engine. These vibrations can damage the camera (the optical stabilizer) of your phone.
Our Sleeve absorbs up to 50% of engine and road vibrations.
To eliminate up to 90% of vibrations, we recommend using the Shapeheart anti-vibration. The anti-vibration is also recommended when using the metal plate in all circumstances.
ALL HANDLEBARS
Turnkey installation
ALL HANDLEBARS
Turnkey installation
1. Choose the adapter based on the diameter of your handlebar:
- Handlebar of 31.8 mm in diameter: no adapter.
- Handlebar of 28.6 mm in diameter: 1.7 mm adapter.
- Handlebar of 25.4 mm in diameter: 3.5 mm adapter.
- Handlebar of 22.2 mm in diameter: 5.1 mm adapter.
2. Position the adapter on the handlebar, then screw the mount on top using the Allen key.
3. Adjust the Booster 360 (or extension arm) to your liking by tightening the 3 screws on the orientation axes, until the Booster can no longer move.
4. Insert your phone into the Sleeve, snap it onto the mount (making sure to center it properly) and off you go!
Do you still have questions?
Does it really hold? Can the phone fall?
Yes, it holds. You have seen it in the videos above, and if thousands of recognized stores and retailers across Europe (Intersport, Decathlon, Fnac, etc.) have trusted us for several years, it's not for nothing.
So yes, if you hit a tree on a mountain bike or do backflips on a motocross bike, the mount could detach — but if you're like most people, there will be no issue at all.
To find out more, click here.
Are the magnets harmful to my phone?
No. Simply because there is no magnetic field in the sleeve or through the plate. We explain everything here.
Bear in mind that brands like Apple now even put magnets inside the phone itself.
I've heard that mounts can damage the phone's camera?
That's true, for motorcycles only, where the engine vibrations of certain bikes can damage the optical stabilizer of some phones (mainly iPhone).
Our mounts with Sleeves absorb vibrations, so there's no risk.
We explain everything here.
Can someone steal my phone?
The question is legitimate, but it is absolutely not an issue we have encountered.
For one thing, the mount is removable. Our mounts are very discreet, with no apparent distinguishing marks. There is no greater risk than walking down the street with your phone in your hand.
Snatch thefts happen, most of the time, in public transport. On the subway, for example, where once the doors are closed, there is nothing you can do.
Again, the question is legitimate, but we have not received a single report of this type of theft.
If your concern remains, you can install the Shapeheart Phone Lanyard.
Is the Sleeve touch-screen compatible?
Of course. And to ensure the touchscreen is as responsive as possible, it's important to choose the right sleeve size — refer to our size guide.
Does the Sleeve really protect against rain?
The Classic and Pro sleeves protect against rain but are not designed to be submerged in water — they are not waterproof. For that, you need to choose the waterproof sleeve.
But under normal conditions, you can ride in the rain without worry with our 3 sleeves.
Does the phone get hot?
Obviously, inside the Sleeve the phone will run hotter than without one. Then it all depends on the phone, the GPS, whether you are charging the phone at the same time, and the outside temperature.
It's rare but it can happen. In that case, it is better to go with the version with a metal plate.
Are there any reflections in the sun?
Yes, it can happen. Depending on the position of the sun, the phone, or your posture on your 2-wheeler. You can use the metal plate to limit this effect, but keep in mind that even without a Sleeve, in full sunlight, visibility can be reduced.
Don't forget to set your brightness to the maximum either.
Can I charge my phone?
Of course! The Classic and Pro Sleeves have a slot to pass the charging cable through.
What if I change my phone?
If you stay with an equivalent size, you have nothing to buy. If not, you can simply repurchase the Sleeve — no need to buy everything again.
Is there a warranty?
Yes, up to 10 years by registering your product. Everything is explained here.
Is it compatible with wireless charging and/or MagSafe?
The metal plate is not directly compatible with wireless charging. By sticking the metal plate onto your phone case, you simply need to remove the case from your phone to charge it on your MagSafe charger.
MagSafe alone won't be enough to withstand impacts. You must use the Shapeheart Sleeve or metal plate to ensure proper use of the mounts.
Which version to choose?
Everything is explained: here.
