The attachment guide for  bikes

Thanks to our various magnetic mounts for bikes (and scooters), you can attach your phone in seconds and let your GPS guide you.

But, among our 3 bike mounts, which one should you choose for the best experience?

Classic Bike

Handlebar mount

Strap attachment
Elastic strap

Ideal for your bike's handlebar or stem, discover the easiest magnetic phone mount to install on the vast majority of handlebars and stems (round/square) from 20 to 50 mm in diameter.

With its silicone strap, secure your mount onto handlebars up to 30 mm in diameter.

Classic Bike Mount

The strap and elastic fasteners:

For which vehicle(s)?

  • Bike
  • Scooter
  • Stroller
  • Motorcycle

Compatibility

The strap is compatible with handlebars up to 30 mm in diameter.

The elastics are compatible with handlebars and stems up to 50 mm in diameter.

Installation

THE STRAP:

  1. Place the dock on the handlebar or stem, having first attached the strap to 2 hooks.
  2. To distribute the tension evenly across the strap, we recommend pulling it downward first and then to the side.
  3. Wrap it around, pulling as tight as possible, and hook it onto the last 2 attachment points.

THE ELASTICS

Make sure to always use both provided elastics. Each elastic must be attached to 2 hooks, not all 4.

The elastics must not cross and should be positioned as follows:
A - A
B - B

Pro bike

Screw-on handlebar mount

The screw-on bike handlebar mount is compatible with handlebars from 22 to 32 mm in diameter.

Thanks to its 3 silicone adapters, the mount ensures optimal hold.

Pro Bike Mount

Pro bike mount

For which vehicle(s)?

  • Bike
  • Scooter
  • Motorcycle

Compatibility

Compatible with motorcycle and bike handlebars from 22 to 32 mm in diameter

Installation

1. Choose the adapter based on your handlebar diameter: 

  • 31.8 mm diameter handlebar: no adapter required.
  • 28.6 mm diameter handlebar: 1.7 mm adapter.
  • 25.4 mm diameter handlebar: 3.5 mm adapter.
  • 22.2 mm diameter handlebar: 5.1 mm adapter.

2. Position the adapter on the handlebar, then screw the mount on top using the Allen key.

3. Insert your phone into the sleeve, snap it onto the mount (making sure to center it properly), and off you go!

BIKE STEM

Bike fork tube mount

The fork tube mount integrates into your bike by screwing in place of the stem cap. It is compatible with M6 star-fangled nuts.

Bike Stem Mount

Fork tube mount

For which vehicle(s)?

  • Bike

Compatibility

Compatible with M6 headset star-fangled nuts (1"1/8) from 28 to 32 mm in diameter

Installation

  1. Using the Allen key, unscrew the stem cap and position the mount in the fork tube.
  2. Hand-tighten the mount as much as possible, remove the rubber cover from the mount, and finish tightening with the key in the center of the magnets.
  3. Put the cover back on the mount. Insert your phone into the sleeve, snap it onto the mount (making sure to center it properly), and off you go!

Shapeheart guides

1 3