They trust us:
Protects your phone
Absorbs vibrations
Protects your phone
Absorbs vibrations
By mounting your phone on your motorcycle or scooter, it can be subject to certain high-frequency vibrations emitted by your vehicle's engine. These vibrations can damage the camera (the optical image stabilizer) of your phone.
Our sleeve absorbs up to 50% of engine and road vibrations.
To eliminate up to 90% of vibrations, we recommend using the Shapeheart anti-vibration mount. The anti-vibration mount is also recommended when using the metal plate in all circumstances.
STEERING STEM
Plug-and-play installation
STEERING STEM
Plug-and-play installation
1. Choose the right adapter and nut based on the diameter of your steering stem:
- Steering stem of 11 to 13.9 mm: 11 mm adapter and 11 mm nut.
- Steering stem of 14 to 16.9 mm: 14 mm adapter and 11 mm nut.
- Steering stem of 17 to 24 mm: 17 mm adapter and 14 mm nut.
2. Remove the silicone cover from the mount, tighten firmly using the Allen key until the cylindrical silicone part is compressed and it is impossible to remove the mount by hand.
3. Put the silicone cover back on. Insert your phone into the sleeve, snap it onto the mount (making sure to center it properly) and you're good to go!
Do you still have questions?
Are the magnets harmful to my phone?
No. Simply because there is no magnetic field inside the sleeve or through the plate. We explain everything here.
Keep in mind that brands like Apple now even put magnets inside the phone itself.
I've heard that mounts can damage the phone's camera?
That's true, for motorcycles only — engine vibrations from certain bikes can damage the optical image stabilizer of some phones (mainly iPhone).
Our mounts with sleeves absorb vibrations, so there is no risk.
We explain everything here.
Can my phone be stolen?
The question is legitimate, but it is absolutely not an issue we encounter.
For one thing, it's worth noting that the mount is removable. Our mounts are very discreet, with no apparent distinguishing features. There is no more risk than when walking down the street with your phone in hand.
Snatch thefts happen, most of the time, on public transport. On the subway, for example, where once the doors are closed, there is nothing you can do.
Again, the question is legitimate, but we have not had a single report of this type of theft.
If your concern remains, you can install the Shapeheart Phone Lanyard.
Is the sleeve touchscreen-compatible?
Yes, of course. And to ensure the touchscreen is as responsive as possible, it is important to choose the right sleeve size — please refer to our size guide.
Does the sleeve really protect against rain?
The Classic and Pro sleeves protect against rain but are not designed to be submerged in water — they are not waterproof. For that, you need to choose the waterproof sleeve.
But under normal conditions, you can ride in the rain without any worries with our 3 sleeves.
Does the phone heat up?
Of course, inside the sleeve the phone will heat up more than without one. It then depends on the phone, the GPS, whether you are charging the phone at the same time, and the outside temperature.
It's rare but it can happen. In that case, it is better to go with the version using a metal plate.
Are there reflections in sunlight?
Yes, it can happen. Depending on the position of the sun, the angle of your phone, or your posture on your two-wheeler. You can use the metal plate to reduce this effect, but keep in mind that even without a sleeve, in direct sunlight, visibility can be reduced.
Don't forget to set your brightness to the maximum either.
Can I charge my phone?
Yes of course! The Classic and Pro sleeves have a slot to pass the charging cable through.
What if I change my phone?
If you stay with an equivalent size, you don't need to buy anything. If not, you can just buy the sleeve again — no need to repurchase everything.
Is there a warranty?
Yes, up to 10 years by registering your product. Everything is explained here.
Is it compatible with wireless charging and/or MagSafe?
The metal plate is not directly compatible with wireless charging. By sticking the metal plate onto your phone case, you simply need to remove your phone case to charge it on your MagSafe charger.
MagSafe alone will not be strong enough to withstand impacts. It is essential to use the Shapeheart sleeve or plate to ensure proper use of the mounts.
Which version should I choose?
Everything is explained: here.
