Patented magnetic system
Safe for your phone
Excellent grip
Tested at high speed (225 km/h)
Anti-vibrations
Protects the phone from engine and road vibrations
Universal sleeve
Compatible with all brands
Weatherproof
Protects from rain
Half-handlebar
Hole from 11 to 24 mm in diameter
They trust us:
Protects your phone sleeve
Absorbs vibrations
Protects your phone sleeve
Absorbs vibrations
By mounting your phone on your motorcycle or scooter, it can be subjected to certain high-frequency vibrations emitted by your vehicle's engine. These vibrations can damage the camera (the optical stabilizer) of your phone.
Our sleeve absorbs up to 50% of engine and road vibrations.
To eliminate up to 90% of vibrations, we recommend using the Shapeheart anti-vibration mount. The anti-vibration mount is also recommended when using the metal plate in all conditions.
STEERING COLUMN
Turnkey installation
STEERING COLUMN
Turnkey installation
1. Choose the right adapter and nut based on your steering column diameter:
- Steering column from 11 to 13.9 mm: 11 mm adapter and 11 mm nut.
- Steering column from 14 to 16.9 mm: 14 mm adapter and 11 mm nut.
- Steering column from 17 to 24 mm: 17 mm adapter and 14 mm nut.
2. Remove the silicone cover from the mount, tighten firmly using the Allen key until the cylindrical silicone part is compressed and it is impossible to remove the mount by hand.
3. Install your mini booster on the mount using the Allen key.
Do you still have questions?
Are the magnets harmful to my phone?
No. Simply because there is no magnetic field in the sleeve or through the plate. We explain everything here.
Bear in mind that brands like Apple now even put magnets inside the phone.
I've seen that mounts could damage the phone camera?
True, but only for motorcycles where the engine vibrations of certain bikes can damage the optical stabilizer of certain phones (mainly iPhone).
Our mounts with sleeves absorb vibrations, so there is no risk.
We explain everything here.
Can my phone be stolen?
The question is legitimate, but it is absolutely not an issue we encounter.
First, keep in mind that the mount is removable. Our mounts are very discreet, with no obvious distinguishing features. There is no more risk than walking down the street with your phone in hand.
Snatch thefts occur most of the time on public transport. On the subway, for example, where once the doors close, there is nothing you can do.
Again, the question is legitimate, but we have not had a single report of such thefts.
If your concern remains, you can install the Shapeheart Phone Lanyard.
Is the sleeve touch-sensitive?
Yes, of course. And to ensure the touch screen is as responsive as possible, it is important to choose the right sleeve size — refer to our size guide.
Does the sleeve really protect against rain?
The Classic and Pro sleeves protect against rain but are not designed to be submerged in water — they are not waterproof. For that, you need to choose the waterproof sleeve.
But under normal conditions, you can ride in the rain without any issue with our 3 sleeves.
Does the phone get hot?
Obviously, in the sleeve the phone will get warmer than without a sleeve. It then depends on the phone, the GPS, whether you are charging the phone at the same time, and the outside temperature.
It is rare but can happen. In that case, you should opt for the version with the metal plate.
Are there any reflections in the sun?
Yes, it can happen. Depending on the position of the sun, the position of the phone, or your posture on your two-wheeler. You can use the metal plate to reduce this effect, but keep in mind that even without a sleeve, in full sunlight, visibility can be reduced.
Also remember to set your brightness to maximum.
Can I charge my phone?
Yes, of course! The Classic and Pro sleeves have a slot to pass the charger cable through.
What if I change my phone?
If you stay with an equivalent size, you don't need to buy anything. If not, you can just repurchase the sleeve — no need to buy everything again.
Is there a warranty?
Yes, up to 10 years by registering your product. Everything is explained here.
Is it compatible with wireless charging and/or MagSafe?
The metal plate is not directly compatible with wireless charging. By sticking the metal plate onto your phone case, you simply need to remove your phone case to charge it on your MagSafe charger.
MagSafe alone will not be sufficient to withstand impacts. It is essential to use the Shapeheart sleeve or plate to ensure proper use of the mounts.
Which version should I choose?
Everything is explained: here.
Free shipping
from €49 and shipped within 24 to 48 hours
Secure payments
Visa, Mastercard, Paypal, Apple Pay
Here for you 7 days a week
Customer support 7/7 days: contact@shapeheart.com
Product warranty
10 years by registering your product!
