One phone, multiple vehicles: one mount that follows

Many people ride with the same smartphone across two or three different vehicles: the motorcycle at the weekend, the bike for commuting, the car for long trips. But until now, each vehicle required its own mount, often incompatible with the others. The Shapeheart magnetic logic changes this: one metal plate stuck once to your case, and all your mounts become compatible with each other.

How does the metal plate work?

The metal plate is a thin self-adhesive steel sheet. It sticks to the back of a hard, smooth, clean case in a single application. All Shapeheart mounts integrate a magnet on the mounting side: your phone snaps on with one gesture and comes off just as easily, with no clip to handle and no screw to loosen.

One important point: the plate sticks to the case, not directly to the phone. It is not suitable for soft silicone cases or textured or curved surfaces. If you change cases, a new plate goes on the new hard surface in a matter of seconds.

Where to start: the complete mount for your main vehicle

The first step is to choose a complete mount for the vehicle you use most. This type of mount already includes a magnetic sleeve that holds the phone and can be attached or removed without tools. Once this first mount is installed, your phone is set up and ready for what comes next.

If you ride mainly by motorcycle, the PRO BOOST motorcycle stand is the recommended starting point. It is the best-seller of the range. It includes a magnetic sleeve and a 360° extension arm to orient the screen according to the sun's position or your posture. It fits all standard handlebars — roadster, trail or custom.

If your main vehicle is the bike, the PRO bike mount is the handlebar equivalent. It includes a magnetic sleeve designed for long rides on gravel, road or mountain bike. Same logic: you set up your phone via this first mount, and all additional mounts become directly compatible.

Add mounts for your other vehicles

Once your phone is set up via the first mount, each additional vehicle only needs a magnetic mount with a metal plate. These versions, without a sleeve, work directly with the metal plate already stuck to your case. They are also less bulky to install on handlebars already loaded with accessories.

And what about the car?

The Shapeheart car mount works on the same magnetic principle. It clips onto the cabin air vent and receives your phone with one gesture, whether it is fitted with a metal plate or a sleeve. For people who navigate both on handlebars and behind the wheel, it is the third mount to add to their setup.

From a legal standpoint, French road safety regulations remind us that holding your phone while driving is a punishable offence. An approved fixed mount on the dashboard or air vent allows you to use your GPS without breaking the law, provided the phone is placed before you set off. Magnetic placement and removal in one gesture makes precisely this behaviour easier.

The same gesture as on the handlebars, in a different context: you place the phone when you get in, you remove it when you get out. No clip to open, no mount to detach.

One metal plate stuck once to your case. Motorcycle, bike, car: all your mounts become compatible, with the same gesture.

Frequently asked questions

Do you need to buy a new metal plate for each new mount?

No. A single metal plate stuck to the back of your case is enough for all Shapeheart mounts. If you change cases, you stick a new plate to the new hard surface. The metal plate is available separately if you want to keep one in reserve.

Is the metal plate compatible with all cases?

It adheres to a hard, smooth case. It is not suitable for soft silicone cases, textured surfaces or very curved backs. If your current case is not compatible, a standard smooth hard case will do the job before you stick the plate.

Can I start with the bike mount if it is my main vehicle?

Yes, absolutely. Start with a complete mount with sleeve for your first vehicle, whatever it is. The PRO bike mount is the starting point if you ride mainly by bike. You then add the magnetic mounts with metal plate for the motorcycle or the car, in the order that suits your needs.

Are the TU motorcycle and bike mounts less stable than the versions with a sleeve?

No. The magnetic hold is identical. The difference is the absence of a sleeve around the phone: the device is held bare on the mount. This can also be an advantage in strong heat, since air circulates freely around the phone during navigation.

Can the same metal plate be used alternately on the motorcycle and the bike?

Yes, that is exactly the principle. The metal plate stays stuck to your case permanently. It is the mount that changes depending on the vehicle, not the plate. You place the phone on the motorcycle stand in the morning, then on the bike mount in the afternoon, without touching the case or the plate.