Patented Magnetic System
Safe for your phone
Excellent grip
Tested at high speed (225 km/h)
Anti-vibration
Protects the phone from engine and road vibrations
Universal Sleeve
Compatible with all brands
Weatherproof
Rain protection
Half handlebar
Hole from 11 to 24mm in diameter
They trust us:
Protects your phone
Absorbs vibrations
Protects your phone
Absorbs vibrations
By mounting your phone on your motorcycle or scooter, it may be subject to certain high-frequency vibrations emitted by your vehicle's engine. These vibrations can damage the camera (the optical stabilizer) of your phone.
Our Sleeve absorbs up to 50% of engine and road vibrations.
To eliminate up to 90% of vibrations, we recommend using the Shapeheart anti-vibration. The anti-vibration is also recommended when using the metal plate in all circumstances.
STEERING COLUMN
Turnkey installation
STEERING COLUMN
Turnkey installation
1. Choose the right adapter and nut based on your steering column diameter:
- Steering column from 11 to 13.9 mm: 11 mm adapter and 11 mm nut.
- Steering column from 14 to 16.9 mm: 14 mm adapter and 11 mm nut.
- Steering column from 17 to 24 mm: 17 mm adapter and 14 mm nut.
2. Remove the silicone cap from the mount, tighten firmly using the Allen key until the cylindrical silicone part is compressed and the mount cannot be removed by hand.
3. Install your mini booster onto the mount using the Allen key.
Do you still have questions?
Are the magnets harmful to my phone?
No. Simply because there is no magnetic field in the sleeve or through the plate. We explain everything here.
Keep in mind that brands like Apple now even put magnets inside the phone itself.
I've heard that mounts can damage the phone's camera?
That's true, for motorcycles only, where engine vibrations from certain bikes can damage the optical stabilizer of certain phones (mainly iPhone).
Our mounts with sleeves absorb vibrations, so there's no risk.
We explain everything here.
Can someone steal my phone?
The question is legitimate, but it is absolutely not a concern we encounter.
For one thing, the mount is removable. Our mounts are very discreet, with no obvious distinguishing features. There is no more risk than when walking down the street with your phone in hand.
Snatch thefts happen, most of the time, on public transport. On the subway, for example, where once the doors close, there is nothing you can do.
Again, the question is legitimate, but we have not had a single report of this type of theft.
If your concern remains, you can install the Shapeheart Phone Lanyard.
Is the Sleeve touch-screen compatible?
Of course. And to ensure the touchscreen is as responsive as possible, it's important to choose the right Sleeve size — refer to our size guide.
Does the Sleeve really protect against rain?
The Classic and Pro Sleeves protect against rain but are not designed to be submerged in water — they are not waterproof. For that, you need to choose the waterproof Sleeve.
But under normal conditions, you can ride in the rain without any worries with our 3 Sleeves.
Does the phone get hot?
Obviously, the phone will heat up more inside the Sleeve than without it. It then depends on the phone, the GPS, whether you're charging the phone at the same time, and finally the outside temperature.
This is rare but it can happen. In that case, you should opt for the version with a metal plate.
Are there any reflections in the sun?
Yes, it can happen. Depending on the sun's position, the phone's angle, or your posture on your two-wheeler. You can use the metal plate to limit this effect, but keep in mind that even without a sleeve, in direct sunlight, visibility can be reduced.
Don't forget to set your brightness to the max either.
Can I charge my phone?
Of course! The Classic and Pro Sleeves have a slot to pass the charging cable through.
What if I change my phone?
If you stay with an equivalent size, you have nothing to buy. If not, you can simply repurchase the Sleeve — no need to buy everything again.
Is there a warranty?
Yes, up to 10 years by registering your product. Everything is explained here.
Is it compatible with wireless charging and/or MagSafe?
The metal plate is not directly compatible with wireless charging. By sticking the metal plate onto your phone case, you simply need to remove the case from your phone to charge it on your MagSafe charger.
MagSafe alone won't be enough to withstand impacts. You must use the Shapeheart Sleeve or metal plate to ensure proper use of the mounts.
Which version to choose?
Everything is explained: here.
Free delivery
from €49 and shipped within 24 to 48 hours
Secure payments
Visa, Mastercard, Paypal, Apple Pay
At your service 7/7 days
Customer service 7/7 days: contact@shapeheart.com
Product warranty
10 years by registering your product!
