They trust us:
ANY HANDLEBAR
Turnkey installation
ANY HANDLEBAR
Turnkey installation
1. Choose the adapter based on your handlebar diameter:
- 31.8 mm diameter handlebar: no adapter needed.
- 28.6 mm diameter handlebar: 1.7 mm adapter.
- 25.4 mm diameter handlebar: 3.5 mm adapter.
- 22.2 mm diameter handlebar: 5.1 mm adapter.
2. Position the adapter on the handlebar, then screw the mount on top using the Allen key.
3. Insert your phone into the sleeve, snap it onto the mount (making sure to center it properly) and you're good to go!
UNIVERSAL SLEEVE AND PLATE
Compatible with your phone
Choose the sleeve best suited to your phone from the 2 sizes (XL / 2XL) for an optimal fit.
Measure the height of your phone with its case or search through our list below (recommendation given with the case).
Do you still have questions?
Are the magnets harmful to my phone?
No. Simply because there is no magnetic field in the sleeve or through the plate. We explain everything here.
Keep in mind that brands like Apple now even put magnets inside the phone itself.
I've seen that mounts can damage the phone camera?
That's true, but only for motorcycles, where the engine vibrations of certain bikes can damage the optical image stabilizer of some phones (mainly iPhone).
Our mounts with sleeves absorb vibrations, so there is no risk.
We explain everything here.
Can my phone be stolen?
The question is legitimate, but this is absolutely not an issue we encounter.
For one thing, the mount is removable. Our mounts are very discreet, with no obvious distinguishing features. There is no more risk than when walking down the street with your phone in hand.
Snatch thefts happen, most of the time, on public transport. On the subway, for example, where once the doors are closed, there is nothing you can do.
Again, the question is legitimate, but we have not had the slightest report of that type of theft.
If your concern remains, you can install the Shapeheart Phone Leash.
Is the sleeve touch-sensitive?
Yes of course. And to ensure the touchscreen is as responsive as possible, it is important to choose the right sleeve size — refer to our size guide.
Does the sleeve really protect against rain?
The Classic and Pro sleeves protect against rain but are not designed to be submerged in water — they are not waterproof. For that, you need to choose the waterproof sleeve.
But under normal conditions, you can ride in the rain without any worries with our 3 sleeves.
Does the phone get hot?
Of course, inside the sleeve the phone will get warmer than without one. Then it all depends on the phone, the GPS, whether you are charging the phone at the same time, and the outside temperature.
It's rare but it can happen. In that case, you should opt for the version with a metal plate.
Is there glare in the sun?
Yes, it can happen. Depending on the position of the sun, the phone, or your posture on your two-wheeler. You can use the metal plate to reduce this effect, but keep in mind that even without a sleeve, in direct sunlight, visibility can be reduced.
Don't forget to set your brightness to maximum either.
Can I charge my phone?
Yes of course! The Classic and Pro sleeves have a slot to pass the charging cable through.
What if I change my phone?
If you stay with an equivalent size, you don't need to buy anything. If not, you can just buy the sleeve again — no need to replace everything.
Is there a warranty?
Yes, up to 10 years by registering your product. Everything is explained here.
Is it compatible with wireless charging and/or MagSafe?
The metal plate is not directly compatible with wireless charging. By sticking the metal plate onto your phone case, you simply need to remove your phone case to charge it on your MagSafe charger.
MagSafe alone will not be sufficient to withstand impacts. You must use the Shapeheart sleeve or metal plate to ensure proper use of the mounts.
Which version should I choose?
Everything is explained: here.
