They trust us:
Protects your phone
Absorbs vibrations
Protects your phone
Absorbs vibrations
Our Sleeve absorbs up to 50% of engine and road vibrations, eliminating any risk of damage.
ALL MIRRORS
Turnkey installation
ALL MIRRORS
Turnkey installation
1. Choose the correct adapter based on your mirror tube diameter:
- Mirror tube from 15 to 17 mm: no adapter needed.
- Mirror tube from 11 to 15 mm: 1 mm adapter.
- Mirror tube from 8 to 11 mm: 3 mm adapter.
2. Using the Allen key, screw the magnetic mount with the head facing down to avoid dropping the screws, then reposition it facing up.
3. Insert your phone into the Sleeve, snap it onto the mount (making sure to center it properly) and off you go!
Do you still have questions?
Are the magnets harmful to my phone?
No. Simply because there is no magnetic field in the sleeve or through the plate. We explain everything here.
Bear in mind that brands like Apple now even put magnets inside the phone itself.
I've heard that mounts can damage the phone's camera?
That's true, for motorcycles only, where engine vibrations from certain bikes can damage the optical stabilizer of certain phones (mainly iPhone).
Our mounts with Sleeves absorb the vibrations, so there is no risk.
We explain everything here.
Can someone steal my phone?
The question is legitimate, but it is absolutely not an issue we have ever observed.
First of all, it's worth noting that the mount is removable. Our mounts are very discreet, with no obvious distinguishing features. There is no greater risk than walking down the street with your phone in your hand.
Snatch thefts occur, most of the time, on public transport. On the metro, for example, where once the doors close, there's nothing you can do.
Again, the question is legitimate, but we have not had a single report of this type of theft.
If you remain concerned, you can install the Shapeheart Phone Lanyard.
Is the Sleeve touch-screen compatible?
Yes, of course. And to ensure the touchscreen is as responsive as possible, it's important to choose the right Sleeve size — refer to our size guide for that.
Does the Sleeve really protect against rain?
The Classic and Pro Sleeves protect against rain but are not designed to be submerged in water — they are not waterproof. For that, you need to choose the waterproof Sleeve.
But under normal conditions, you can ride in the rain without any worries with our 3 Sleeves.
Does the phone get hot?
Obviously, the phone will heat up more inside the Sleeve than without it. It then depends on the phone, the GPS, whether you're charging the phone at the same time, and finally on the outside temperature.
It's rare but it can happen. In that case, you should opt for the version with the metal plate.
Are there reflections in the sun?
Yes, it can happen. Depending on the position of the sun, the angle of the phone, or your posture on your two-wheeler. You can use the metal plate to reduce this effect, but keep in mind that even without a Sleeve, in direct sunlight, visibility can be reduced.
Don't forget to set your brightness to the maximum as well.
Can I charge my phone?
Of course! The Classic and Pro Sleeves have a slot to pass the charging cable through.
What if I change my phone?
If you stay with an equivalent size, you have nothing to buy. If not, you can simply repurchase the Sleeve — no need to buy everything again.
Is there a warranty?
Yes, up to 10 years by registering your product. Everything is explained here.
Is it compatible with wireless charging and/or MagSafe?
The metal plate is not directly compatible with wireless charging. By sticking the metal plate onto your phone case, you simply need to remove the case from your phone to charge it on your MagSafe charger.
MagSafe alone won't be enough to withstand impacts. You must use the Shapeheart Sleeve or metal plate to ensure proper use of the mounts.
Which version to choose?
Everything is explained: here.
